www.ana-white.com - Lumber:
- Four (4) 4x4 posts (length will depend on your desired height typically 36-40 inches)
- Two (2) 2x4 boards (length will depend on the width of your cooler, plus a few extra inches)
- Two (2) 2x4 boards (length will depend on the depth of your cooler, plus a few extra inches)
- Four (4) 1x4 boards (length will depend on the width/depth you chose, and will make the side cladding)
- 1 1/4" exterior wood screws
- Sandpaper (various grits 80, 120, 220)
- Exterior wood stain or paint (your choice of color)
- Wood sealant (for weather protection)
- Measuring tape
- Pencil
- Saw (circular saw, miter saw, or hand saw)
- Drill with drill bits and screwdriver bits
- Sander (optional, but recommended)
- Clamps (optional, but helpful)
- Safety glasses
- Work gloves
Measure and cut all of your lumber according to your dimensions. The 4x4 posts will be the legs, and the 2x4s will form the frame that will support the cooler. Be precise with your cuts to ensure a square and stable stand. Double-check all measurements before cutting.
Assemble the 2x4 frame by attaching the side pieces to the front and back pieces using wood screws. Pre-drill pilot holes to prevent the wood from splitting. Make sure the frame is square by measuring the diagonals; they should be equal. Use clamps to hold the pieces together while screwing them. This frame will be placed on top of the legs.
Attach the 4x4 posts to the inside corners of the 2x4 frame. Position the posts flush with the top edge of the frame and secure them with wood screws. Use multiple screws per leg for added stability. Ensure the legs are securely attached, as they will bear the weight of the cooler.
The 1x4 planks of wood can be cut into uniform lengths and mounted to the side of the stand. This will give the structure a more aesthetically pleasing look that can be customized to taste. You can measure the perimeter of the cooler stand to figure out how many of these planks to put on to create the look you want.
Sand all surfaces of the cooler stand to smooth out any rough edges and prepare the wood for staining or painting. Start with a coarser grit sandpaper (80 or 120) and gradually move to a finer grit (220) for a smooth finish. Wipe away any sanding dust with a clean cloth.
Apply your chosen stain or paint to the cooler stand according to the manufacturer's instructions. Apply multiple thin coats for even coverage. Allow each coat to dry completely before applying the next. Ensure you're using an exterior-grade stain or paint to protect the wood from the elements.
Once the stain or paint is dry, apply a coat of exterior wood sealant to further protect the wood from moisture and UV damage. This will help prolong the life of your cooler stand. Follow the sealant manufacturer's instructions for application and drying time.
You Might Also Like: 109 Jon Boat Build Plans
Place your cooler into the frame. Make sure it fits snug, but isn't too tight. Position your new cooler stand in your desired location and enjoy easy access to your chilled beverages!
Wooden Cooler Stand
www.artofit.org Wooden Cooler Stand
www.ana-white.com Double Cooler Stand Plans — Matthew Peech Woodworking
www.matthewpeech.com
0 komentar:
Posting Komentar